Tactile Tappers

Thank you for purchasing Tactile tappers by healing alternatives.

Your tactile tappers are made up of a control unit and a responder unit.  The responder unit can only be turned on and off, you will feel only one button on the top of this tapper and feel or see only one green LED light and an HA logo. Your control unit has three buttons at the top, three LED lights red, green and orange and an HA logo on its face. The control unit is where you program your required settings.

Hold your control unit so that you can feel or see the three LED lights and the HA logo facing up. From this perspective we will refer to the control buttons as the top left which has a plus sign, middle button which has a circle and the top right which has a minus sign.

To start your tactile tappers, press and hold the middle button on the top of each unit for about 2 seconds until you feel them tap. All LED lights will come on, then both tappers will begin a session using your last saved settings.  Green LEDs will blink with each tap during the session.

To adjust settings, tappers need to be on.  Holding the control unit only, press and hold both top left and right control buttons simultaneously until you feel a double tap. 

Use the top right minus – button, to lighten the tapping or the top left + button to increase strength of tapping. You have 5 levels. Every time you move through a level you will feel the unit tap until you have reached the strongest or weakest levels.

Press the top middle dot button to move to the rate of tapping setting. O

Use the top right minus – button, for less time between taps (faster tapping) or the top left + button for more time between taps (slower tapping) You have 5 levels. Every time you move through a level you will feel the unit tap until you have reached the fastest or slowest levels.

Press the top middle dot button to move to the session length setting.

Use the top right minus – button, for a shorter session, or the top left + button a longer session. You have 5 levels. Every time you move through a level you will feel the unit tap until you have reached the longest or the shortest session available. Sessions are 5 10,15, 30 and 60 minutes long.

Intensity of tapping, speed of tapping and time of session are the three options to adjust. They are always in this order. When you have activated the options menu use the top middle button to move from tapping intensity to speed of tapping to session time as required.

To save a setting at any time, press and hold both left and right buttons simultaneously until you feel a quick double tap. Your session will begin.

If you press nothing for 20 seconds, the tappers will time out and resume last saved settings. To save your adjustments press and hold the top left and top right buttons simultaneously.

Should your session time out simply repeat the steps just outlined and be sure to save your adjustments press and hold the top left and top right buttons simultaneously.